- Manhal Mansour Awda: A New Approach for Solar Arrays Deployment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 1998.
- Bahaa Ibraheem Kazem: A New Approach for Detection and Location of Defects in Plate Structures, University of Baghdad, College of Engineering, Mechanical Engineering Department, 1999.
- Abbas Zghair Salman: Aerodynamic and Structures Studied of Ellipsoidal Shells, MEC, Baghdad, 2000.
- Safeen Yaseen Az-Deen: Simulation of Satellite Structure Under Space Environment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2001.
- Saad Theeyab Faris: Elastic-Plastic Forming of Semi-Conical Shells, University of Technology, Technical Education Department, 2003.
- Ghanim Shaker Sadiq: Static and Dynamic Analysis of Composite Thin Cylindrical Shells, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2004.
- Hussain Ali Dawood: Determination of Dynamic Characteristics and Inter-Laminar Shear Stresses of Composite Plates Under Various Loading, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2004.
- Ammar Ali Hussain: Developing a Theoretical and Experimental, Static and Dynamical Study for Cylindrical-Conical Connection Shells, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2005.
- Aseel Jasim Mohammed: Instructional Model for Dynamic Analysis of Plates Structure, University of Technology, Technical Education Department, 2005.
- Fadhel Abbas Abdulla: The Effect of Internal Flaws on The Dynamic Behavior of Composite Laminated Plates, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2006.
- Majid Habeeb Faidh-Allah: Optimal Design of Laminated Composites under Cryogenic Environments, University of Technology, Mechanical Engineering Department, 2006.
- Nabil Noor Swadi: Shape Optimization of Paraboloidal Surface Reflectors under Static and Dynamic Loading, University of Technology / Al-Rasheed College of Engineering & Science, Mechanical Engineering Department, 2006.
- Bashar Awiad Bediawi: Nonlinear Analysis of Laminated Composite Plates Based Upon Elastic Plastic Behavior, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2006.
- Sabah Khammass Hussein: Linear and Non-linear Behavior of Viscoelastic Thin Plates Subjected to Uniform Distributed Loading, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2006.
- Wafaa Mahdi Salih: Non-Linear Dynamics of Thick Composite Plates Including the Effect of Shear & Rotary Inertia, University of Technology, Technical Education Department, 2007.
- Hatam Kareem Kadhom: Investigation into Dynamic Stresses & Deformations of Industrial Turbine: An Instructional Design, University of Technology, Technical Education Department, 2007.
- Wedad Ibraheem Al-Azzawy: Fatigue and Vibration Characteristics of Laminated Shell of Revolution, University of Baghdad, Mechanical Engineering Department, 2007.
- Kadhim Kamel Resan: Analysis and Design Optimization of Prosthetic Below Knee, University of Technology, Mechanical Engineering Department, 2007.
- Ala’a Dahham Younis: Theoretical and Experimental Analysis of Deep Drawing Process with Draw Beads, University of Technology, Production & Metallurgy Engineering Department, 2007.
- Salwan Hasan Thabit: Vibration Characteristics of Coupled Structures Due to Energy Flow Using Statistical Energy Analysis Method, University of Technology, Mechanical Engineering Department, 2007.
- Ahmed Kasim Hassan: Dynamic Analysis of Composite Tubes Subjected to Pressure Wave – an Instructional Computer Program, University of Technology, Electromechanical Engineering Department, 2007.
- Ali Hassan Saleh: The Effect of Die Profiles on Combined Forward – Backward Extrusion Process, University of Technology, Production & Metallurgy Engineering Department, 2008.
- Abbas Ahmed Ayoob: Study of Mechanical Properties of Rubber Under the Effect of Fatigue Stresses, University of Technology, Mechanical Engineering Department, 2008.
- Wael Rasheed Abdul-Majeed, Linear Dynamic Thermo-Elasticity of rectangular Plates, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2008.
- Sadiq Jaffar Aziz: Experimental and Numerical Simulation Study of Tubes Hydroforming Process, University of Technology, Mechanical Engineering Department, 2008.
- Azad Mohammed Ali Saber: Thermo-Mechanical Coupling For Linear And Non-Linear Analysis Composite Plates, Salahaddin University – Hawler, College of Engineering, 2009.
- Jumaa Salman Chiad: Analysis and Optimum Design of the Above Knee Prosthetic Socket, University of Technology, Mechanical Engineering Department, 2009.
- Ebtihal Abbas Sadiq: Dynamics Response of Plates Under Cryogenic Environment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2009.
- Sarmad Dhia Ritha: An Investigation of Friction Stir welding And Stress Relieve By Vibration of 6061T6 Aluminum Alloy, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2009.
- Raid Naim Hoween Al-Dalimi: An analytical, Experimental and Numerical Investigation of Non-Linear Thermo-viscosity Behavior of Laminated Composites and Construction an Instructional Model, University of Technology, Electromechanical Engineering Department, 2010.
- Mohsin Abdullah Al-Shamari: Theoretical And Experimental Investigation of a Cone-Cylinder Shell Under Transient Loading, University of Technology, Mechanical Engineering Department, 2010.
- Emad Kamil Hassein: A Modified Version of The Prosthetic Foot, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2011.
- Sameer Hashim Ameen: Numerical And Experimental Investigation of Ankle-Foot Orthoses Using (Perlon-Carbon Fibers-Acrylic) Materials, Nahrain University, College of Engineering, Mechanical Engineering Department, 2011.
- Hussein Mohammed Hussein Al-Khafaji: Kinematic Analysis of Smart Structure Two Links Semi-Flexible Robot, University of Technology, Mechanical Engineering Department, 2011.
- Mahmud Raseed Ismail: Evaluating the Dynamical Behavior and Stability of Pipes Convoying Fluid, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2011.
- Mohammed Abd AlSatar Mohammed Shaboot: Health Monitoring of Friction Stir Welded Structures Using Vibration Measurements, Nahrain University, College of Engineering, Mechanical Engineering Department, 2012.
- Abdullah Dhaiaa Aasi Munshed: Experimental and Numerical Investigation of Residual Stresses in Compound Cylinders, Nahrain University, College of Engineering, Mechanical Engineering Department, 2012.
- Jawad Zeboon : Composite Plates Under Impact Loading , University of Basra, College of Engineering , Mechanical Eng. Dept, , 2013
- Yaser Y. Khatan :Experimental and Theoretical Investigation of Biaxial Fatigue Behavior of Composite Plates U.O.T. Mechanical Eng. Dept. 2014
- Ammar Saleem Hamid :Design and Analysis of Athletic Limb for People with special Needs. U.O.T. Mechanical Eng. Department , 2014
- Husam A. Kareem :Dynamic Thermo Elasticity of Plates Stiffness due to Different Heat Sources , U.O.T. Mechanical Eng. Department , July ,2015
- Thaer J. Nateshy ;Nonlinear Dynamic and Stability of Pipes Conveying Fluid ,AL-Nahrain University , College of Eng., Mechanical Eng. Dept. , Feb. , 2016
- Omar Khalid Fayadh ;Behavior of self-Compacting Steel Columns Exposed to High Temperatures , AL-Nahrain University , College of Eng. , Civil Eng. Dept. , June 2016.
Supervision of MSc Students
- Abbas Lafta, Application of Finite Element Technique to Problem in Fracture Mechanics of Thick Walled Gun Barrels, University of Baghdad, College of Engineering, Mechanical Engineering department, 1989.
- Ahmed Ali Hussain: A Study Localized Buckling of in Thin Tensioned Plates with Holes, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1993.
- Ragheed Janan Yousif: Stresses and Deformations of Rotating Hollow Turbine Blades, University of Baghdad, College of Engineering, Mechanical Engineering department, 1994.
- Mohammed Isamil Shukri Mahmud Nadim: Application of Finite Element Technique to The Analysis of Plate & Shell Structures, Nahrain University, College of Engineering, Mechanical Engineering department, 1994.
- Saad Zaghlool Said: Dynamic Stresses and Deformations of Rotating Blades, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1994.
- Laith K. Abbas: Application of Finite Element Method to Static and Dynamic Behavior of Axi-symmetric Thin Shells with Different Types of Cutouts, MEC, Baghdad, 1994.
- Sameer Hashim Ameen: Static and Dynamic Behavior of Cylindrical Stiffened Shells with and without Cutouts, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1995.
- Ali Hussain Aleoy: Dynamic Stresses and Deformations of Partially Pressurized Thick Cylindrical shells, MEC, Baghdad, 1995.
- Hatam Kareem Kadhom Al-Dafai: Finite Element Study of Gear Tooth Stresses with Presence of a Keyway; University of Baghdad, College of Engineering, Mechanical Engineering department, 1995.
- Bahaa Ibraheem Kazem: Defects Detection and Location in Plate Type Structures from Monitoring Frequency Changes, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996.
- Mohammed Sellab Hamza: Stresses and Deformations of Partially Pressurized Thick Cylindrical Shells, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996.
- Thair Razzaq Hussain: Application of Finite Elements Methods to Stability of Shells of Revolutions, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996.
- Abbas Mohammed Hussain: Study of Static and Transient Behavior of Solid Propellant Rocket Motor Combustion Chamber, MEC, Baghdad, 1997.
- Ismaeel Kh. Abdullah Al-Jubury: Finite Element Study of Static and Dynamic Behavior of Stiffened Plates, MEC, Baghdad, 1997.
- Ghanim Shaker Sadiq: Determination of Dynamic Stresses and Deformations in Thick Cylinders Subjected to Impulsive Loading, Nahrain University, College of Engineering, Mechanical Engineering department, 1997.
- Wedad Ibraheem Al-Azzawy: Finite Elements Modeling of Intersected Plates Found in CNC Milling Machine, University of Baghdad, College of Engineering, Mechanical Engineering department, 1997.
- Ali Ibraheem Hassan: Vibration Analysis of Hollow Shafts Stiffened Internally and Externally by Rings Using Finite Elements Method, MEC, Baghdad, 1997.
- Abdul Wahab Nima Al-Ani: Static and Dynamic Behavior of Thick Cylinder Subjected to Internal Transient Pressure, University of Baghdad, College of Engineering, Mechanical Engineering department, 1998.
- Ammar Jabour Khlil: Flutter Analysis of Aircraft Wing, MEC, Baghdad, 1998.
- Wisam Saadoon Ibrahim: Static and Dynamic Behavior of orthotropic Laminated Plates Subjected to General Loading Condition, University of Baghdad, College of Engineering, Mechanical Engineering department, 1998.
- Ebtihal Abbas Sadiq: Elastic and Elasto-Plastic Analysis of Stepped Thick Cylindrical Shells; University of Baghdad, College of Engineering, Mechanical Engineering department, 1998.
- Bashar Awaid Bedawi AL-Shewely: Finite Element Study of a Profiled Nozzle, University of AL-Mustansirya, College of Engineering, Mechanical Engineering department, 1999.
- Tarik Hassan ELsoni: Aerodynamic and Structural Design of a Jet Trainer Aircraft Wing, MEC, Baghdad, 2000.
- Salwan Abdul Kareem Khaz’al: Analysis of Stiffened and Unstiffened Shells of Revolution Subjected to Air-blast Loading, University of Baghdad, College of Engineering, Mechanical Engineering department, 1999.
- Ayman Mohammed Osman Mohammed: Investigation of Dynamic Loading Effects on the Design of Solid-Propellant Rocket Motor Combustion Chamber, MCE, Baghdad, 2000.
- Kasim Abbas Attya: Thermal and Rotation Effects on Dynamic Stresses, Deformations and Vibrations of Rotating Gas Turbine Blades, University of Baghdad, College of Engineering, Mechanical Engineering department, 2000.
- Moayad Rajab AL-Kubaycy: Investigation of the Transient Response of Composite Laminated Plates Including the Effect of Cutout, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2000.
- Nazar Abdul-Kareem Hussain: Static and Dynamic Behaviour of Aircraft Fuselage Subjected to Aerodynamic Loading, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2000.
- Fadhel Abbas Abdulla: Analysis of Composite Plates Subjected to Impact Load, University of AL-Mustansirya, College of Engineering, Mechanical Engineering Department, 2001.
- Mohammed Rameedh Ghargan: Optimum Design of Aircraft Wing Structure Using Finite Element Method, University of Technology, Mechanical Engineering Department, 2001.
- Oday Ibraheem Abdullah: Investigation of Blades Failure of An Axial Fan, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2003.
- Issam Kadhim Jassim: Dynamic Analysis of Spur Gear Teeth Using Finite Element Technique, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2003.
- Muhannad Lafta Shlaga: Analysis of Stiffened and Unstiffened Composite Plates Subjected to Time Dependent Loading, University of Kuffa, College of Engineering, Mechanical Engineering Department, 2005.
- Asaad Khudhair Mizher: Stress Analysis for Die Casting By Using Finite Element Method, University of Technology, Production Engineering and Metallurgy Department, 2005.
- Mazin Ismail Jabbar: Dynamic Analysis and Synthesis RSCR Special Mechanism, AL-Mustansirya University, College of Engineering, Mechanical Engineering Department, 2004.
- Nasser Hammed Farhood: The Analysis of Aerodynamic and Structural Design for Delta Wing Configuration, University of Technology / Al-Rasheed college of engineering and science, Mechanical Engineering Department, 2004.
- Hamad Mohammed Hasan: Analysis of Compressor Rotor Blade Subjected to Mechanical and Thermal Stresses, University of Technology / Al-Rasheed college of Engineering and Science, Mechanical Engineering Department, 2005.
- Salah Hajee Abed A’on: The Analysis of Subsonic Companied Wing Design Using Organic Ideal Technology; University of Technology, College of Engineering, Mechanical Engineering Department 2005.
- Amer Fadhil Nori: Numerical and Analytical Investigation of Rotating Turbine Rooters Subjected to Thermal and Mechanical Loading, University of Technology, Technical Education Department, 2005.
- Triq Samir Talib: Flutter Speed Limits of Subsonic Wings, University of Technology, Mechanical Engineering Department, 2005.
- Amal Aayez Abdulla: Analysis of Spur Gear Set by Finite Element Method, Foundation of Technical Education, Technical College of Baghdad, 2005.
- Bakir Nori Khider: Optimum Shape and Location of Opening in Syme’s Prosthesis Under General Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2005.
- Wisam Oday Hussain: Non-Linear Dynamic Analysis of Spur Gear, Analytical and Numerical Studies, University of Technology, Mechanical Engineering Department, 2005.
- Ali Hammoudi Abdul-Kareem: Structural Stability of Composite Plate with Presence of Cutouts, Foundation of Technical Education, Technical College-Baghdad, 2005.
- Abdul-Monim Razoki Majeed: Stress Analysis of Trans Tibial Prosthetic Socket, Foundation of Technical Education, Technical College-Baghdad, 2005.
- Najah Restom Muhsin: Determination the Dynamic Characteristics of a Fan Blade Used in Al-Nassiriyah Power Plant, Foundation of Technical Education, Technical College-Baghdad, 2005.
- Ahmed Noori Uwayed: Analysis of Thin Tensioned Composite Plates with Different Types of Cutouts, University of Al-Anbar, College of Engineering, Mechanical Engineering Department, 2005.
- Arz Yahya Rzayeg: Linear Viscoelastic Behavior Composite Beams, University of Al-Anbar, College of Engineering, Mechanical Engineering Department, 2005.
- Haidar Hadi Khaleel: Determination of Inter Laminar Stresses and Deformations of Composite Beams Subjected to Time Dependants Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2005.
- Ali Kammel Jabr: Stability of Stiffened and Unstiffened Thin Shell of Revolution, University of Technology / Al-Rasheed college of Engineering and Science, Mechanical Engineering Department, 2005.
- Wssam Abelsada Khlewi: Linear Dynamics of Thick Plates Including the Effect of Shear and Rotary Inertia, University of Technology, Mechanical Engineering Department, 2005.
- Lawrence Ameer Petrus Alous: Experimental and Numerical Investigation of Composite Tubing Subjected to General Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2006.
- Alaa Abdul Zahra Dalli: Dynamic Buckling of Composite Laminated Plates, University of Kuffa, College of Engineering, Mechanical Engineering Department, 2006.
- Haidar Saadi Esaa Al-Saadi: Effect of Particulated Addititives on the Characteristics of Composite Materials, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007.
- Nabeel Shallal Thamer Al-Muramdy: Mechanical Properties of Composites Using Natural Rubber with Epoxy Resin, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007.
- Ibraheem Talal Hussain: Manufacturing and Analysis of T-Branch Components Using Bluge Forming (Tube Hydroforming) Processes, Nahrain University, College of Engineering, Mechanical Engineering Department, 2007.
- Ammar Dawood Ghali: Theoretical and Experimental Analysis of Tube Sinking Process, Foundation of Technical Education, Technical College of Baghdad, 2007.
- Hassan Majeed Hamed: A Study of Low Velocity Impact of Composite Laminated Plates, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007.
- Baraa Mahdi Jassim: Static and Dynamic Characteristics of Composite Plates AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007.
- Ali Jameel Hassan: Effect of Shape and Location of Cutout on the Dynamic Response of Thin Cylindrical Shells, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2008.
- Zaid Mohammed Salih: Biaxial Testing of Fiber Composites To Evaluate The Fxy Factor Of Tsai-Wu Stress Failure Theory, Nahrain University, College of Engineering, Mechanical Engineering Department, 2008.
- Anwar Jumaa Ahmed: Strengthening of PVC Pipes Against Axial, Bending, Torsional and Combined Loading Using GFRP Composites, Nahrain University, College of Engineering, Mechanical Engineering Department, 2008.
- Mustafa Ibrahim Salim: The Effect of Support Conditions on Vibration Characteristics in a Pipe Conveying Fluid, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2008.
- Omar Oday Salman: Investigation of Mechanical Properties of Epoxy with Ceramic Materials, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2009.
- Ghaith Ghanim Hameed: Springback and Sidewall Curl of U-Shape Metal Sheet Forming, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009.
- Zahid Ibrahim Mohammad: A Theoretical Study into the Vibration Characteristics of Different Cross-Section Pipes with Different End Conditions, University of Technology, College of Engineering, Mechanical Engineering Department, 2009.
- Husain Mohan Suker: Characteristics of Laminated Composite Plate Due To Fatigue Load, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009.
- Sidqi Mohammed Sadik: Buckling of Composite Plates with Different Types of Cutouts, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009.
- Ammar Basil Nadir: Study of Mechanical and Physical Properties of Cupper-Alumina Composite Produced by Powder Metallurgy, Nahrain University, College of Engineering, Mechanical Engineering Department, 2009.
- Shayma Hameed Mohammed: Experimental and Numerical Investigation into Fatigue of Below-Knee Prosthetic Socket, Foundation of Technical Education, Technical College of Baghdad, 2010.
- Mohanad Najeh Mohammed: Optimal Analysis and Design of a Pylon for the Prosthetic Below Knee, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2010.
- Zaid Ghalib Abdulkadhim: Investigation of Mechanical Properties of Elastomers, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2010.
- Ali A. Najim :Study of Failure Mode in Bolt Adapter of Prosthetic SACH Foot , AL-Nahrain University , College of Eng., Mechanical Eng. Dept., 2013
- Ahmad Adnan Annoz : Vibration of Pipes Conveying Fluid , AL-Nahrain University , College of Eng., Mech. Eng. Dept., 2013
- Bashar K. Abdul-Razzaq :Theoretical and Experimental Investigations of Creep and Buckling Effects on Composite Columns. , Baghdad University , College of Eng,, Mech. Eng. Dept., 2013
- Zainab M. Hwaidi : Evaluating the Dynamic Behavior of Multi-discs and Journal Bearing Rotors, AL-Nahrain University , College of Eng., Mech Eng. Dept, 2014
- Jana S. Jaffar : vibration Measurements and analysis of through Knee Prosthesis , AL-Nahrain University , College of Eng. , Mech. Eng. Dept. , Dec. 2015 .
- Saif M. Abbas :Analysis , Design and Manufacturing of ankle Foot Orthesis Using Different gait Cycle Scenarios , , AL-Nahrain University , College of Eng., Mech Eng.Jan.t, 2015
- Nawzad K. Khareem : Numerical and Experimental Investigation of Tool Geometry Effects in Friction Stir Processing of Aluminum Alloys. , Jan. 2016 .
- Mustafa A. Kodi :Comparison of Creep Relaxation and Fatigue Capabilities of Composite Prosthetic Foot Material and SACH Foot BKA ,, AL-Nahrain University , College of Eng., Mech Eng. April 2016
- Muhannad A. AL-Saadi ; Experimental and F.E. Analysis of a Modified Patellar Tendon Bearing Ortheses Patients with Heel Vicers, AL-Nahrain University, College of Engineering, Mech. Eng. Dept., Jan., 2017
Supervision of Diploma Students:
- Rahem Na’em Hwien: Study of the Stress Distribution on Piston Heads Using the Finite Element Method, MCE, Baghdad, 1985.
- Jawad Ubaid Al-Abid: Determination of Optimum Thickness for a Regeneratively Cooled Rocket Thrust Chamber with Storable Liquid Propellant, MCE, Baghdad, 1990.
- Munjed Salih Mahdi: Design of Liquid Propellant Rocket Tanks, MCE, Baghdad, 1995.
- Salam Attia Kurjy Al-Janaby: Theoretical Studies for Modification of Hydraulic Presses Design, University of Baghdad, MCE, Baghdad, 1998.
- Abu Elnur Abdeen Ali Abu Elnur: Determination of Optimum Shape and Location of Cutout in Thin Tensioned Plates, Sudan University for Science & Technology, 2001.