1. Hussain J. Abbas and Muhsin J. Jweeg “Application of Vibrational Methods for Prediction of Bonding Forces Using Fast Fourier Transform” Proceedings of International ASME Conference, Signals and Systems, Brazil, Vol. 2, pp. 185-196, 1988
  2. Muhsin J. Jweeg and Nabil M. Motosh “Determination of Optimum Rim Thickness in Toothed Gear Wheels” Scientific Journal of M.E.C., No. 4,pp.131-144, 1989.
  3. Muhsin J. Jweeg, B. H. Abdshebib and N. M. Motosh “Investigation of Involute Gear Tooth Critical Section” Scientific Journal of MEC, No. 5, pp. 64-85, 1989.
  4. Najdat A. Mahmood, Muhsin J. Jweeg and Mumtaz Y. Rajab “An Investigation of Partially Pressurized Thick Cylindrical Shells” Modeling, Simulation and Control, B, ASME Press, Vol. 25, No. 3, PP. 47-64, 1989.
  5. Muhsin J. Jweeg and Hussain J. Abbas “A Fast Technique for the Prediction of Quality Factor of a Vibrational System” International, ASME Conference Signals and Systems, Brighton, U.K, Vol. 6, pp. 129-140, July 12-14, 1989.
  6. Muhsin J. Jweeg and Nabil M. Motosh “Forming of Semi Conical Shell: Elastic Phase of Deformation” International Conference, Signals and Systems, Brighton, U.K, ASME Press, Vol. 6, pp. 9-20, July 12-14, 1989.
  7. Muhsin J. Jweeg “Application of Finite Element Method to Study the Stress Distribution in Shell of Revolution Subjected to Non-Axisymmetric Loading” Intern. ASMS Conference, Signals and Systems, Cetinje, Yougoslavia, Vol. 5, pp. 3-14, Sep. 3-5, 1990.
  8. Muhsin J. Jweeg, Adnan N. Jamil and Abbas Lafta “Application of the Finite Element Method to Elastic Stress Analysis of a Cracked Thick-Walled Pressure Vessel” Modelling, Simulation and Control, B, ASME Press, Vol. 37, No. 2, PP. 37-50, 1991.
  9. Nabil M. Motosh and Muhsin J. Jweeg “Study of Edge Stresses In Partially Pressurized Cylindrical Shells” Scientific Journal of M.E.C., No. 8, pp. 94-107, 1991.
  10. Nabil M. Motosh and Muhsin J. Jweeg “Study of Rotating Axi-Symmetrical Shell” Scientific Journal of M.E.C., No. 7, pp. 30-48, 1991.
  11. Mumtaz Y. Rajab, Najdat A. Mahmood and Muhsin J. Jweeg “Study of Thermal Failure of Gun Barrels” Scientific Journal of M.E.C., No. 6, pp. 65-83, 1991.
  12. Kasim A. Khalf and Muhsin J. Jweeg “Precision Cutting of Blanks by Axial Stress” Scientific Journal of M.E.C., No. 9, pp. 63-72, 1992.
  13. Imad A. Hussain and Muhsin J. Jweeg “Optimum Thickness of Symmetric Angle-Ply Laminates to Eliminate Extensional and Bending Stiffnesses” Journal of the Institution of Engineering, India, Vol. 74,pp. 99-104,  November, 1993.
  14. Muhsin J. Jweeg, Imad A. Hussain and Balsam H. Abed “Reduction of Noise and Increasing Strength of the Gear Tooth Using Unsymmetrical Generating Rack” The 2nd Engineering Scientific Conference M.E.C., March 22-24, 1994, Special Issue of the MEC Journal No. 14.
  15. Najdat A. Mahmood, Muhsin J. Jweeg and Ahmed A. Hussain “A Study of Localized Buckling in Thin Tensioned Plates with Holes” Engineering and Technology, University of Technology, Baghdad, Iraq, Vol. 13, No. 13, pp. 133-153,1994.
  16. Muhsin J. Jweeg and S. Z. Said “Effect of Rotational and Geometric Stiffness Matrices on Dynamic Stresses and Deformations of Rotating Blades” Journal of the Institution of Engineers, India, Vol. 76,pp.29-38, May 1995.
  17. Muhsin J. Jweeg and Laith. K. Abbas “Static and Dynamic Behavior of Un stiffened Thin Cylindrical Shells with Cut Out Using FEM” Engineering and Technology, University of Technology, Baghdad, Iraq, Vol. 15, Nos. 1 & 2, Jan-Feb. 1996.
  18. Muhsin J. Jweeg “Static Bending Deflections and Flexural Frequencies of Prismatic Cantilever Tapered Beams by Galerkin’s Method” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 3, pp.13-24,  December 1997.
  19. M. J. Jweeg, A. N. AL-Timimy and B. I. Kazem “Detection and Location of Defects in a Plate Structure by Vibration Technique” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 3,31-47, Sep. 1998.
  20. Muhsin J. Jweeg and Samir H. Ameer “Static and Dynamic Response of Stiffened Thin Cylindrical Shell with and without Cutouts” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 2, pp. 91-115, March 1998.
  21. A. N. AL-Timimy, M. J. Jweeg and M. M. Awda “Solar Array Deployment” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 1,81-94, March 1998.
  22. M. J. Jweeg, A. N. AL-Timimy and W. AL-Azzawy “Finite Element Modeling of Column of CNC Milling Machine for Static Rigidity and Natural Frequencies” Journal of the Iraqi Society of Engineers-serial-151-No. 3. Pp.13-27, 2002.
  23. Bahaa I. Kazem , M. J. Jweeg and Adnan N. AL-Timimi “Damage Effect on The Transient Response of a Plate Structure Subjected To a Suddenly Applied Load” The 3rd Jordanian Mechanical & Industrial Engineering Conference JMIEC, pp. 1-10, May 1999.
  24. Ebtihal A. Sadiq, Adnan N. Jamil and Muhsin J. Jweeg “Elsto-Plastic Analysis of Stepped Thick Cylindrical Shells” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 5, No. 2, pp. 185-210, 1999.
  25. Muhsin J. Jweeg, Adnan N. Jamil and Wisam S. Ibrahim “Analysis of Symmetric and Antisymmetric Laminated Plates by Introducing Shear Deformation and Rotary Inertia Effects Using a Refined Higher Order Shear Theory” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 5, No. 2, pp. 211-239, 1999.
  26. Muhsin J. Jweeg, Ghanim Sh. Sadiq and Najdat A. Mohamood “A Suggested Analytical and Numerical Solutions for Dynamic Stresses and Deformations of Thick Cylinders Subjected to Time Dependent Loading” Journal of M.E.C., NO. 20, March, pp 1-21, 2000.
  27. Muhsin J. Jweeg, A. N. Jamel and S. A. Khazas “Effects of Air Blast Loading on the Analysis of Stiffened and Un stiffened Shells of Revolution” The 3rd Engineering Scientific Conference M.E.C., Baghdad, pp. 530-544,2000.
  28. Muhsin J. Jweeg, S. S. Hassan and A. M. Osman “Transient Response Analysis of Solid Rocket Motor Combustion Chamber” The 3rd Engineering Scientific Conference M.E.C., pp.194-202, 2000.
  29. Muhsin J. Jweeg and Ali H. Aleoy “Dynamic Stresses and Deformations of Partially Pressurized Thick Cylindrical Shells” MEC, NO. 19, Feb. 2000.
  30. Muhsin J. Jweeg and Ismaeel K. AL-Jibury “Numerical and Experimental Investigations of Stiffened Plates under Bending Loads” MEC, NO. 19, Feb. 2000.
  31. Adnan D. Mohamed and Muhsin J. Jweeg “A Suggested Method for Determination the Coupling between the Structure and Noise Fields in a Cavity” Scientific Journal of M.E.C., No. 20, pp. 46-66, Mar. 2000.
  32. Adnan N. AL-Tamimi, M. J. Jweeg and Bahaa I. Kazem “Effectiveness of the Degeneration Shell Element with an Assumed Shear Strain Field in Free Vibration Analysis of Plate Structures” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 6, No. 3,pp. 191-208, 2000.
  33. Adnan N. AL-Tamimi and Muhsin J. Jweeg “Determination of Stresses and Deformation of Hollow Turbine Blades” The First Regional Conference for Mechanical Engineering Metallurgy and Material Engineering, Kufa University, pp. 1-9, 17-19 Oct, 2000.
  34. M. J. Jweeg, Adnan N. AL-Tamimi and Bahaa I. Kazem “A New Approach for Identification Failure Position in Symmetrical Plate Structure” The 1st National Conference of Mechanical, Metallurgy and Material Engineering, 7-19,Oct  2000.
  35. K.I. Mahmoud, M. J. Jweeg and A. J. Khalil “Determination of Flutter Speed of an A/C Wing” The 3rd Engineering Scientific Conference M.E.C., pp. 111-120, March 2000.
  36. Muhsin J. Jweeg, Mumtaz Y. Rijab, and A. Bedawi “Analysis of a Profiled Nozzle” M.E.C. The 3rd Engineering Scientific Conference M.E.C., pp.424-436, 2000.
  37. M. J. Jweeg, A. N. Jamil, H. K. Kadhom “Study of Gear Tooth Stresses with the Presence of a Keyway” Scientific Journal of M.E.C., No. 18, pp. 65-91, Feb. 2000.
  38. Muhsin. J. Jweeg, Adnan N. Jamil and Thair R. Hussain “Bifurcation Buckling of Shell of Revolution” Scientific Journal of M.E.C., No. 20, pp. 22-45, March 2000.
  39. Adnan N. Jamil, M. J. Jweeg, Moayad R. AL-Kubaycy “Investigation of the Transient Response of Composite Laminated Plates Including the Effect of Cutout” Scientific Journal, College of Engineering, University of Baghdad, Vol. 7, No. 1, pp. 121-161, March 2001.
  40. Muhsin J. Jweeg, Adnan N. Jamel, Kasim A. Attya “Thermal Gradient Effects on The Dynamic Stresses, Deformations and Vibrations of Rotating Gas Turbine Blades” Scientific Journal, College of Engineering, University of Baghdad, Vol. 8, No. 4, , pp. 287-306, Dec. 2002.
  41. Muhsin J. Jweeg and Samera K. Radi “Analysis of Composite Plates Subjected to Impact Loading Part II: Numerical solution:” Journal of Engineering and Development, Vol. 11 No. 2 , PP. 69-86, Sept. 2007.
  42. Muhsin J. Jweeg and Safa. H. Abdulrahman “Vibration Analysis of Hollow Shaft Stiffened Internally and Externally by Rings Using Finite Element Method” The Second Regional Conference of Mechanical, Metallurgy and Material Engineering, Kufa University, College of Engineering, 2-4, 2002.
  43. A.N AL-Timimy, Muhsin J. Jweeg and W. AL-Azzawy “Finite Element Modeling of Transient Response of CNC-Milling Machine Column” AL-Muhandis-Journal of the Iraqi Society of Engineers, No. 3, Sept 2002.
  44. Adnan N. Jamil, Muhsin J. Jweeg, Mahmod F. Edan and Safeen Y. Az-deen “The Effect of Space Environments Factors on Spacecraft Structure” Scientific Journal, College of Engineering, University of Baghdad, Vol. 9, No. 1, pp. 77-88, March 2003.
  45. Muhsin J. Jweeg, Mohammad Qasim and Issam K. J. “Effect of Design Parameters on the Location of the Weakest Section and Stress Concentration of Spur Gear Tooth” the 5th Scientific Conference, College of Engineering, Baghdad University, 25-27,pp. 585-599, Feb 2003.
  46. A. N. Al-Timimy, Muhsin J. Jweeg and G. S. Sadiq “Thermal and External Load Effects on Static Bending Simply Supported Circular Cylindrical Composite Shells” The 5th Scientific Conferences College of Engineering, University of Baghdad, 25-27, Feb. 2003.                     
  47. Hussain A. Dawood, Adnan N. Jamil and Muhsin J. Jweeg “An Elasticity Solution for Calculating Inter Laminar Stresses in Laminated Composite Plates Under Various Loading” The 5th Scientific Conferences College of Engineering, University of Baghdad, 25-27, Feb. 2003.
  48. Adnan N. Al-Tamimi, Muhsin J. Jweeg and Nazar A. Hussain “Arbitrarily Laminated, Anisotropic Stiffened and Unstiffened Cylindrical Shell under Internal Pressure” Al-Rafidain Engineering, Vol. 11, No. 2, pp. 27-38. 2003.
  49. Muhsin J. Jweeg, A. S. Kasim and Oday I. Abdullah “Stress Analysis of Axial Flow Fan” The 5th Scientific Conferences of College of Engineering, University of Baghdad, 25-27, Feb. 2003.
  50. Muhsin J. Jweeg, Adnan N. Jamil and Hussain A. Dawood “A New Development of Interply Delamination Criterion (Idc) for Composite Laminates” International Mechanical Engineering Conference IMECE, Kuwait,pp. 498-520,  Dec. 5-8, 2004.
  51. Muhsin J. Jweeg, Shaker S. Hassan and Ali B. Assi “Investigation of the Thermal Effects on the Static Characteristics of Cylindrical – Conical Intersection” Scientific Journal, College of Engineering, University of Baghdad, Vol. 10, No. 4, pp. 491-505, Dec. 2004.
  52. Muhsin J. Jweeg, Ahmed A. Hussain and Ali H. Alwazeer “Composite Structure Stability in the Presence of Cutout” The 5th South African Conference on Computational and Applied Mechanics (SACAM), 14 December 2005.
  53. Kamal K. Saify, Adnan N. Al-Timimy and Muhsin J. J. “The Timoshenko Three-Beams Technique To Estimate The Main Elastic Moduli of Orthotropic Homogeneous Materials” Al-Khwarizmi Engineering Journal, Vol. 1, No. 2, pp. 52-63, 2005.
  54. Muhsin J. Jweeg, Abbass Z. Salman, Naseer H. Farhood “Strength Analysis of Delta Wing Structure with Different Configurations” Engineering & Technology Journal, Vol. 24, No. 8, pp. 1107-1127, 2005.
  55. Muhsin J. Jweeg, Fahim Al-Himdani, Mazin Islail “Dynamic modal Analysis and Synthesis of RSCR Spatial Mechanism” Engineering & Technology Journal, Vol. 24, No. 8, pp. 1033-1051, 2005.
  56. Muhsin J. J., A. B. Assi., A. A. Al. Filfily “The Effect of Pressure and Thermal Loading on the Static Behavior and Cylindrical-Conical Shell Intersections with linear Thickness Distribution” Amman Conference, Dead Sea, Jordan, Civil Engineering, 10-13 April, 2006.
  57. Muhsin J. J., Adnan D. M. and Majid H. F. “Optimal Design of Graphite/Epoxy Composite Laminate Plate Under Cryogenic Environment Experimental and Numerical Investigations” 4th Jordanian Civil Engineering Conference, Jordan, 10-13 April, 2006.
  58. H. T. Rasheed, Muhsin J. Jweeg and A. A. Al-Waeeli “Modeling and Analysis of Partially Pressurized Thick Cylindrical Shells Subjected to Thermal Loading” Nahrain University, College of Engineering Journal NUCEJ, Vol. 9, No. 1, pp. 67-88, 2006. 
  59. Muhsin J. Jweeg, Samira K. Radhi and Sabah K. Hussein “Analytical, Theoretical and Experimental Investigation of Linear Viscoelastic Thin Plate Deflection with Two Edges Fixed and the Other Two Simply Supported” Journal of Engineering and Development, Vol. 11, No. 1, pp. 104-122, March 2007.
  60. Muhsin J. Jweeg, Ahmed A. Al-Beiruti, Kadhim K. Al-Kinani “Design and Analysis of New Prosthetic Foot” Al-Khwarizmi Engineering Journal, Vol. 3, No. 1, pp. 12-25, 2007.
  61. Muhsin J. Jweeg, Samira K. Radhi and Haider F. Feama “An Experimental Comparative Study Between Polypropylene and Laminated Lower Limb Prosthetic Socket” Al-Khwarizmi Engineering Journal, Vol. 3, No. 1, pp. 35-41, 2007.
  62. Muhsin J. Jweeg and Wedad I. Alazzawy “A Suggested Analytical Solution for Laminated Closed Cylindrical Shells Using General Third Shell Theory (GTT)” Nahrain University, College of Engineering Journal NUCEJ, Vol. 10, No. 1, 2007.
  63. Muhsin J. Jweeg, Shokat Al-Tornachi and Tariq Samir Talib “Flutter Speed Limits of Subsonic Wings” Journal of Engineering, College of Engineering, University of Baghdad, Vol 18, No. 2, pp 163-183, Feb, 2012.
  64. Muhsin J. Jweeg, Ahmad A. AL-Beruti and Kadhim K. Resan “Design a New Below Knee Socket and study the Pressure Distribution and Stresses Developed ” Journal of Arabian Union Universities for Engineering Sciences, Baghdad University Vol. 15 , No. 2 , PP. 1-24, 2008
  65. Muhsin J. Jweeg, Sameera A. Abed Al-wahed and Wafaa M. Salih “Nonlinear Dynamics of Thick Composite Laminated Plates Including the Effect of Transverse Shear and Rotary Inertia” The 1st Regional Conference of Eng. Sci. NUCEJ, Spatial Issue, Vol. 11, No. 1, pp.251-262, 2008.
  66. Qasim M. Doos, Muhsin J. Jweeg and  Sarmad Dhia Ridha “Analysis of Friction Stir Welds. Part I: Transnet Thermal Simulation Using Moving Heat Source” the 1st Regenal Conference of Eng. Sci. NUCEJ Special Issue, Vol. 11, No. 3, pp. 429-437, 2008. 
  67. Muhsin J. Jweeg, Shawkat J. Al-Tornachi and Salah H. Abid-Aum “Optimization of Light Weight Aircraft Wing Structure” Journal of Engineering & Development, Vol. 12, No. 1, pp. 1-22, March 2008.
  68. Muhsin J. Jweeg and Bakr N. Al-Hassan “Optimum Shape and Location of Opening in Syme Socket Prostheses Under General Loading” Journal of Al-Rafidain Engineering, College of Engineering, University of Mosul, Vol. 16, No. 1, pp. 59-74, 2008.
  69. Muhsin J. Jweeg, Adnan D. Mohammed and Nabil N. Swadi “A Novel Deployable Open Ends Support Reflector” Eng. & Tech., Engineering and Technology Journal, University of Technology Vol. 26, No. 8, pp 894-906, 2008.    
  70. M. J. Jweeg, S. S. Hasan and J. S. Chiad “Effect of Lamination Layers on the Mechanical Properties for Above Knee Prosthetic Socket” University of Technology, Eng. And Technology Journal, Vol. 27, No. 4, pp. 759-775, 2009.
  71. Jamal Hussien Muhamed, Muhsin J. Jweeg and Ali Hassan Saleh “The Effect of Area Reduction of Forward Die on the Combined Forward-Backward Extrusion Process” AL-Nahrain University, College of Engineering Journal NUCEJ, Vol. 12, No. 2, pp. 108-121, 2009.
  72. Muhsin J. Jweeg, Ammar A. Al-Filfily and Ali B. Assi “The Effect of Thermal Loadings on the Dynamic Behavior of Cylindrical – Conical Intersection Shell” University of Technology, Eng. & Tech. Journal, Vol. 27, No. 4,pp. 831-851, 2009.
  73. Ghaith G. Hameed, Muhsin J. Jweeg and Ali Hussain “Springback and Side Wall Curl of Metal Sheet in Plain Strain Deep Drawing” Medwell Journals, research and Journal of Applied Sciences, pp. 192-202, September 2009.
  74. Muhsin J. Jweeg and Wisam Auday Hussain “Contact Stresses for Different Gear Design Parameter” Eng. & Tech. Journal, Vol. 27, No. 13, pp. 2274-2300,  2009.
  75. Muhhsin J. Jweeg and Ali Jameel Hassan “Effect of Shape and Location of Cutout on the Vibration Frequencies of Thin Composite Cylindrical Shells” The 6th Engineering Conference, College of Engineering, Mechanical and Nuclear Engineering, Vol. III, pp. 270-284, 5-7 April, 2009.
  76. Muhsin J. Jweeg, Wedad I. Al-Azzawy and Ebtihal A. Sadiq “Free Vibration of Composite Laminated Plate Subjected To Cryogenic Environments” The 6th Engineering Conference, College of Engineering, Mechanical and Nuclear Engineering, Vol. III, pp. 175-191,  5-7 April, 2009. 
  77. Muhsin J. Jweeg and Wedad Al-Azzawy ”Free Vibration Analysis For Laminated Truncated Conical Shells Using High Order Theory” The 6th Engineering Conference, College of Engineering, Vol. III, pp. 208-225, 5-7 April, 2009.
  78. Muhsin J. Jweeg, Samira k. Radi and Fadhel A. Abdullh “Effects of Internal Flaws in Static and Dynamic Behavior of Composite Plates” Emirates Journal for Engineering Research 15(2), pp.18-28, 2010
  79.  Muhsin J. Jweeg and Zahid Ibrahim Mohammed “Vibration Characteristics of Different Cross-Section Pipes with Different End Conditions” Eng. & Tech. Journal, Vol. 28, No. 8, pp. 1634-1654, 2010.
  80. Jamal Hussain Mohammed, Muhsin J. Jweeg and Ali Hasan Saleh “Investigation of Friction Condition Through Radial Tip in the Combined Forward-Backward Extrusion Process”  Dirasat, Engineering Sciences, Jordan, Vol. 37, No. 2, pp. 183-193, 2010.
  81. Azad Mohammed Ali Saber, Safeen Yaseen Ezaldeen and Muhsin J. Jweeg “Thermo Mechanical Coupling of Laminated Composite Plates Using Finite Element Method” 3rd International Conference, Advanced Composite Material Engineering COMAT, Romania, pp. 273-278, 27-29 October 2010.
  82. Muhsin J. Jweeg and Wedad I. Alazzawy “A Study of Free Vibration and Fatigue for Cross-Ply Closed Cylindrical Shells Using General Third Shell Theory (GTT)” Journal of Engineering, Baghdad University, Vol. 16, No. 2, pp. 5170-5184, June 2010.
  83. Muhsin J. Jweeg, Adnan M. Al-Sultany and Raed Naeem Hwyyin “Nonlinear Analysis of Thermo-Viscoelasticity of Laminated Composites” Eng. & Tech. Journal, Vol. 28, No. 14, pp.  2010.
  84. Muhsin J. Jweeg, Adnan D. Mohammed and Mohsin A. Alshamari “Theoretical and Experimental Investigations of Vibration Characteristics of a Combined Composite Cylindrical-Conical Shell Structure” Eng. & Tech. Journal, Vol. 28, No. 24, 2010.
  85. Muhsin J. Jweeg, Ali Hussain Al-Hilli and Hussain Mohan Suker “Experimental Study of Fatigue Characteristics of Laminated Composite Plates” Journal of Engineering, Vol. 16, No. 2,pp. 5185-5198,  June 2010.
  86. Muhsin J. Jweeg and Kadhim K. Resan Al-Kinani “Design and Analysis of a New Prosthetic Foot” the 5th International Symposium on Advanced Science and Technology in Experimental Mechanics, Japan, pp. 4-7 November, 2010.
  87. Muhsin J. Jweeg, Abudul Rahman Najim Abed and Nawfal A. Abdulrazzag “Evaluation of  Mechanical Properties of Particulate Composites” Al-Khawarizmi Engineering Journal, Vol. 6, No. 4, pp. 72-83, 2010.
  88. Qasim M. Doos, Muhsin J. Jweeg and Sarmad Dhia Ridha “Analysis of Friction Stir Welds Part II: Transient Thermal Stresses and Residual Stresses Using Moving Heat Source” The 2nd Regional Conference for Engineering Sciences, Al- Nahrain University, pp. 256-265, pp. 256-265, 1-2 December, 2010.
  89. Muhsin J. Jweeg, Ali Hussain Al-Hilli and Mustafa Ibrahim Salim “Effect of Support Conditions on Vibration Characteristics in a Pipe Conveying Fluid” The 2nd Regional Conference for Engineering Sciences, Al- Nahrain University, pp. 338-354, 1-2 December, 2010.
  90. Adnan N. Jamel, Muhsin J. Jweeg and Bashar A. Bedaiwi “Elastic-Plastic Analysis of Thermoplastic Matrix-Reinforced Steel Fibers Using Finite Element Method” F.T.E. Scientific International Conference, 12-14 April, 2010.
  91. Muhsin J. Jweeg, Adnan N. Jameel and wael R. Abdul-Majeed “Thermal Buckling Temperature of Rectangular Plates With Different Temperatures Distribution and Ends Condition Using Strain Energy Method” Accepted for Publication, Journal of Engineering, College of Engineering, University of Baghdad, No. 5, Vol. 17, 1047-1065,  Oct., 2011.
  92. Muhsin J. Jweeg, Shakir S. Hassan and Emad K. Hussein “Calculation of a Dorsiflexion Angle of a Prosthetic Foot For Amputees By Using Developed Tactile Displacement Sensor” Diyala Journal of Eng. Sciences, pp. 76-91, 22-23 Dec. 2010.
  93. Azad Mohammed Ali Saber, Safeen Y. Ezalddin and Muhsin J. Jweeg “Elastic Stress Analysis of Laminated Composite Plate Experimentally” 3rd International Conference, Advanced Composite Material Engineering COMAT, Romania, Vol. 2 pp. 1-8, 27-29 October 2010.
  94. Muhsin J. Jweeg, Ahmdd A. Hussain and Wisam Abed Al-Sada Kuleiwi “The Linear Vibrational Behavior of Thick Plate Including the Effects of Shear and Rotary Inertia” Nahrain University, College of Engineering Journal NUCEJ, Vol. 13, No. 1, pp. 13-28, 2010.
  95. Jumaa Salman Chiad, Muhsin J. Jweeg and Shaker S. Hasan “A Suggested New Material Used A-K Prosthetic Socket Lamination” The Iraqi Journal For Mechanical & Material Engineering, Special Issue For 2nd International Conference, College of Engineering, 172-187, 2010. 
  96. Muhsin J. Jweeg, Kadhim K. Resan and Muhanad N. Mohmmed “Design and Manufacturing of a new Prosthetic Low Cost Pylon for Amputee” Journal of engineering and Development, Vol. 14, No. 4, pp. 119-126, December 2010. 
  97. Muhsin J. Jweeg “Evaluation of AL-Nahrain University , College of Engineering Study Plan Term and Quarter Basis” The Development Conference for the University Education of Agriculture and engineering Colleges , AL-Kufa University , 11-12 April, 2011 
  98. Imad A. Hussain, Muhsin J. Jweeg and Muhsin N. Hamza “Boundary Elements Modeling for Small/Large Strain Analysis of Elastomeric Materials” Journal of Engineering, University of Baghdad, Vol. 16, No.1,pp. 4726-4748,  March, 2010.
  99. Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “Stability Boundary for Conservative Pipes Conveying Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011.
  100. Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “An Analytical Approach for Evaluation the Flutter Instability Boundaries for Cantilever Pipes Conveying Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011.
  101. Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “Closed-Form Solution for Evaluating the Principal Instability Regions for Conservation Pipes Conveying Pulsating Flowing Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011.
  102. Muhsin J. Jweeg and Sameer H. Ameen “Experimental and Theoretical Investigations of Dorsiflexion Angle and Life of an Ankle – Foot – Orthosis Made From (Perlon/Carbon Fiber/Acrylic) and Polypropylene Materials” Journal of JSEM, Vol. 11, Special Issue, pp.305-310, 2011.
  103. Muhsen J. Jweeg and Sameer Hashim Ameen “Mechanical Behavior of Perlon-Carbon Fiber-Acrylic Materials of a New Design of Ankle-Foot-Orthosis”  Nahrain University, College of Engineering Journal NUCEJ, Vol. 15, No.  1, pp. 18-28,  May, 2012.
  104. Muhsen J. Jweeg, Albert E. Yousif and Mahmud R. Ismail “Experimental Estimation of Critical Buckling Velocities For Conservative Pipes Conveying Fluid” Journal of Engineering, Al-Khwarizmi College of Engineering, University of Baghdad, Vol. 7, No. 4, pp. 17-26, November, 2011.
  105. Muhsin J. Jweeg and Ammar D. Ghali “Theoretical and Experimental Analyses of Tube Sinking Process” International J. of Eng.  Research & Industrial. Applications. IJERIA, Vol. 4, No. IV, pp. 393-420, November 2011
  106. Muhsin J. J., Moneer H. T. and Mohammed A. M. “Theoretical and Experimental Investigation of Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53” Journal of Engineering, College of Engineering, University of Baghdad, Vol. 18 No 6, pp. 693-709, June 2012
  107.  Muhsin J. Jweeg, Moneer H. Tolephih and Muhammed A. M. “Effect of Friction Stir Welding Parameters (Rotation and Transverse) Speed on the Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53”, ARPN Journal of Engineering and Applied Sciences, Vol. 7, No. 4, p436-446, April- 2012. 
  108. Muhsin . J. Jweeg , Moneer . H. Tolephih , Fadhel .A. Abdulla and Muhammed .A.Sattar , “Numerical and Experimental Analysis of Transient Temperature and Residual Thermal Stresses in Friction Stir Welding of Aluminum Alloy 7020-T53”, AL-Mustansirya University, College of Engineering Conference for the Postgraduate Students, 7-8 May, 2012. .
  109. Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “Experimental and Theoretical Studies of Mechanical Properties For Reinforcement Fiber Types of Composite Materials”, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS vol.12 , no.04 , August 2012 .
  110. Abdulrahman Abed , Muhsin J. Jweeg and Omar O. Salman , “Mechanical Properties of Ceramic Particulate-Filled Polymer Hybrid Composite” , The First National Conference For Engineering Sciences Fnces 12 ,AL-Nahrain University, College of Eng. November 7- 8 , 2012.
  111. Muhsin J. Jweeg , Mahmud R. Ismail , Ahmed A. Anoze , “An Alternative Approach For Evaluating The Natural Frequencies and Stability of Elastic Rotors” , The First National Conference for Engineering Sciences Fnces 12 , AL-Nahrain University, college of Eng.- November 7- 8 , 2012.
  112. Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “A Suggested Analytical Solution of Orthotropic Composite Plate Structure With Crack Effect”, International Journal of Mechanical and Mechatronics Eng., IJMME-IJENS Vol.12, No: 05, Oct 2012, 44- 58. 
  113. Muhsin J. Jweeg , Riyah N.kiter and Ahmed N. Uwayed , “Transient  Analysis of Composite Plates With Different Types of Cutout” Anbar Journal  Engineering Sciences , Ajes-2012 , Vol.5, No.1.
  114. Muhsin J. Jweeg , Ali S. Hammood and  Muhannad AL-Waily , “Experimental and Numerical Study of Oblique Crack Effect on Natural Frequency of Different Composite Plate Structure Types”, Asian Transactions on Engineering (ATE ISSN: 2221-4267) Volume 02 , lssue 05, pp. 81-91, Nov. 2012.
  115. Muhsin J. Jweeg , Ali S. Hammood , and Muhannad AL-Waily ,”A Suggested Analytical Solution of Isotropic Composite Plate with Crack Effect”, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS Vol:12 No:05 pp. pp. 44-58. October 2012.
  116. Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “Analytical Solution to Oblique Crack Effect For Difference Composite Material Plates”, ARPN Journal of Science and Technology , Vol.2 , No.8 ,pp. 697-714, Sep 2012.
  117. Muhsin J. Jweeg , Wedad I. AL-Azzawy and Ebtihal A. Sadiq “Dynamic Response of Composite Plates Under Cryogenic Environment”, International Conference On Mechanics of Nano, Micro, and Macro Composite Structures, Politecnico di torino, Department of mechanical and Aerospace Eng., , Italy,18 to June 2012.
  118. Mohammad Q. Abdullah , Muhsin J. Jweeg , “Analytical Solution of Bending Stress Equation for Symmetric and Asymmetric Involute Gear Teeth Shapes with and Without Profile Correction”, Innovative Systems Design and Engineering , Vol. 3, No.6 , pp. 19-33, 2012.
  119. Wael R. Abdul-Majeed , Muhsin J. Jweeg and Adnan N. Jameel , “Restrained Edges Effect on the Dynamics of Thermoplastic Plates under Different End Conditions”, AL-Khwarizmi Engineering Journal , Vol.8 , No.2 , PP1-11 (2012).
  120. Mohammad Q. Abdullah , Muhsin J. Jweeg , “Simulation of Generation Process For Asymmetric Involute Gear Tooth Shape with and without Profile Correction”, Innovative Systems Design and Eng., pp. 53-67 , vol.3 , No.6 , 2012.
  121. Muhsin J. Jweeg , Moneer H. Tolephih and Muhammed A. M. “Theoretical and Experimental Investigation of Transient Temperatures Distribution in friction stir welding of AA- 7020-T53” Journal of Engineering, Baghdad University, Vol.18, No. 6, June 2012.
  122. Muhsin J. Jweeg , Adnan  D. Mohammed and  Mohsin A. AL-Shamari “A Study of The Effect of Semi-Angle of Cone on The Vibration Characteristics of Cylindrical-Conical Coupled Shell Structure”, Journal of Engineering Volume 18 , No 5, pp. 651-660, May 2012.
  123.  Muhsin J. Jweeg, Shaker S. Hassan, and Yaser Y. Kahtan “Experimental Investigation of the Cruciform Specimen of GFR16 Under Biaxial Monotonic and Cyclic Loading ” International Journal of Science and Eng. Research , Vol. 4, Issue 12, Dec 2013.
  124. Muhsin J. Jweeg , Kadhim K. Resan and Mustafa Tariq , “Study of Creep-Fatigue Interaction In A Prosthetic Socket Below Knee”, Asme 2012 International Mechanical Engineering November 9-15 , 2012 , Houston , Texas , USA.
  1. Mohsin J. Jweeg ,Shaker S..Hasan and Yassr Y.kahtan “Parametric study and Numerical Modeling of CFRP cruciform specimens under biaxial loadings”, international journal of mechanical engineering and technology (IJMETE) , volume 4, issue 5, September – October (2013), pp. 313-322.
  2. Ahmed Hasson , Muhsin J. Jweeg . “Potential for Solar Power to Pump Saline Groundwater and Management”, International Journal of Enhanced Research in Science Technology and Engineering , vol. 2 Issue 1 , Jan – 2013.
  3. Muhsin J. Jweeg ,  Muhannad AL-Wally , “Analytical Investigation of time Dependent Tensional Loading of Stiffened and UN-Stiffened Composite Laminated Plates”, International Journal of Mechanical and Production Engineering Research and (Ijmperd) , vol.3, Issue 4, Oct 2013 , 83 – 96.
  4. Ahmed Hasson ,  Muhsin J. Jweeg , “Soil Organic Carbon Sequestration Under Pastures in Arid Region”, Nature Environment and Pollution Technology An International Quarterly Scientific Journal , vol.12 , No.1 , pp.57-62 , 2013.
  5. Mustafa Tariq Ismaail , Muhsin J. Jweeg and Kadhim Kamil Resan , “Study of Creep-Fatigue Interaction in The Prosthetic Socket below Knee” Innovative Systems Design and Engineering , vol.4, no.5, 2013.
  6. Ahmad A. Hasson, and Muhsin J. Jweeg “Potential for Solar Power to Pump saline Ground Water and Management” 
  7. Alaa Dahham , Azal Refat and Muhsin J. Jweeg , “Finite Element Analysis of Draw Beads in Deep Drawing Processes”, Al Rafidain engineering journal ,Mosul University, College of Eng., Vol .22 No.1 ,Feb.2014.
  8. Muhsin J. Jweeg , Abdal-Kareem F. Hassan and Jawad K. Zeboon , “Experimental and Numerical Investigation of The Dynamic Characteristic of Laminated Composite Plate Hybrid With Steel”, International Journal of Mechanical Eng. , vol.3 , Issue.1 , Jan , 2014, 27-36 .
  9. Muhsin J. Jweeg , Abdul-Kareem F. Hasan and Jawad K. Zeboon , “Investigation of Impact Response For CFRP-Steel Hybrid Composite Plate Under Low-Velocity Impact”, International Journal of Mechanical Eng. , vol.3 , Issue.2 , Mar.2014 , 1-8.
  10. Muhsin J. Jweeg , Moneer H. Tolephih and Abdullah D, Assi : Evaluationg of New Hypothetical Concept (LHSIR) for Die Profile for Hydrostatic Extrusion of Al/Mg Compound , Diayala Journal of Eng, Science Vol. 07 
  11. Muhsin J. Jweeg and Hussain M. AL-khafaji : Compensating the End-Effector Position of a Semi-Flexible Robot , Basrah , University  , The first International Conference of Mechanical Engineering BICME2014 , Basrah , Iraq , 2014
  12. Muhsin J. Jweeg , Shakis S. Hassan and Ammar S. Hamid : Impact Testing of New Athletic Prosthetic  Foot , International Journal of Current Eng. ,Vol. 5 , No. 1 , Feb. 2015.
  13. Muhsin J. Jweeg , Muhannad L. AL-Waily and Alaa A. Deli : Theoretical and Numerical Investigation of Buckling of Orthotropic Composite Plates ,International Journal of Mechanical and Mechatroncs Eng.  IJMME-IJENS, Vol. 15 , No. 04 , 2015
  14. Muhsin J. Jweeg and Thaier N.J. Ntayeesh :Investigation of Vibration Characteristics and Stability of Pipes Conveying Fluid Using  Smart materials , International Journal of science and Research (IJSR) ,Vol. 4 , Issue 12 , pp. 1-12, Dec. 2015.
  15. Muhsin J. Jweeg , Ayad M. Takhakh , and Nawzad K. Kareem : Comparison Between Friction Stir Welding (FSW) and Friction Stir Processing (FSP) of AA5086 Aluminum Alloy , International Journal of Science and Research (IJSR) , Vol. 3 , Issue 6 ,pp. 205-210,  Dec. 2015.
  1. Muhsin J. Jweeg and Thaier N.J. Ntayeesh : Active Vibration Control of Pipes Conveying Fluid Using Piezoelectric Actuators , International Journal of Multi  displinary Engineering Science and Technology  , JMEST , Vol. 2 , Issue 8 ,pp. 2122-2130, Aug. 2015
  2. Muhsin J. Jweeg   and Haider. Y. Ahmad” Experimental and Numerical Estimation of Instability Critical Velocities of Pipes Conveying Fluid ” 13th European Fluid Machinery Congress , Institution of Mechanical Engineers , London, U.K., 3-5 Oct. 2016.
  3. Muhsin J. Jweeg and Muhannad L. Al-Waily : Numerical and Experimental analysis of Cross-Ply and angle-Ply of Composite Laminated Plates Having Various Shapes of Cutouts , Energy and Environment Journal  , Applied Mechanics section , Vol. 7 , Issue 6 , pp. 443-456, 2016  .
  4. Muhsin J. Jweeg :A suggested Analytical Solution of Vibration of Honeycomb sandwich Composites Structure , International Journal of mechanical and mechatronics JMME-IJENS, Vol. 16, No. 02, pp. 1-9, Aug. 2016.
  5. Muhsin J. Jweeg and Jana S. Jaffar : Vibration Analysis of a Prosthesis for Through Knee Amputation , Journal of Engineering , AL-Nahrain University ,NUCEJ , Vol. 19,. No. 1 , PP 46-55 , 2016
  6. Muhsin J. Jweeg , Ayad M. Takak and Saif M. Abbas : Characterization of Materials Used in Manufacturing of above Foot Orthoses , Accepted for publication , International Journal of Energy and Environment , Applied Mechanics Section , 2016
  7. Muhsin J. Jweeg   and Thaier J. Ntayeesh: Determination of Critical Buckling Velocities of pipes Conveying Fluid Rested on different Supports Conditions , International Journal of Computer Applications , Vol. 134 – No. 10 ,Jan. 2016.
  8. Husam A. kareem , Muhsin J. Jweeg and Shaker S. Hassan : Drifting Dynamic Characteristics of heating Load for Aluminum Alloy 7075 T6 , First International Conference on Engineering and Sciences Applications , Kerbala University , College of Engineering , 2015
  9. Hani M. Fahmi , Muhsin J. Jweeg and Omar K.halid : Behavior  of Self-Consolidating Concrete Filled Steel Tube Columns Exposed to High Temperatures , 15th Specialized Scientific Conference, AL-Mansour University College, 23-24 April , 2016 
  10. Muhsin J. Jweeg, Kadhim K. Resan and Ali A. Najim ” Study and Analysis of Failure Mechanism of Bolt Adapter in Prosthetic SACH Foot” Journal of Eng. and Technology, No. 6, pp. 1442-1506, 2014.
  11.  Muhsin J. Jweeg, Kadhim K. Resan and Ali A. Najim” Study and Analysis of Fatigue Failure (Bolt Adapter) of Prosthetic SACH Foot” International Journal of Mechanical and Production, Eng. Research and Development (IJMPERD), Vol. 4 , Issue 2 , pp. 1-8, Apr. 2014.
  12. Muhsin J. Jweeg, and Muhannad L. AL-Waily” Determination of Inter-Laminar Shearing Stresses Using A Suggested Analytical Solution in the Composite Laminated Plates” International Journal of mechanical Engineering, Vol. 2 , Issue 5, pp. 45-60, Nov. 2013.
  13. Mahmud R. Ismail and Muhsin J. Jweeg ”  Natural Frequencies of Multi-Irregular span Beams Under Elastic Supprts by Modal Analysis Method” AL-Nahrain University, College of En. Journal(NUCEJ), Vol.18, No. 2, pp. 284-293, 2015.
  14. Muhsin J. Jweeg, and Muhannad L. AL-Waily” Dynamic Analysis of Stiffened and Unstiffened Composite Plates, The Iraqi Journal for Mechanical and Material Eng., Vol. 13, No. 4, pp. 689-714, 2013.
  15. Muhsin J. Jweeg, and Sameer H. Ameen”Experimental and Theoretical Investigations of Dorsflexion Angle and Life of an Ankle-Foot-Orthosis Made From (Perlon-Carbon Fibfre-Acrylic) and Polypropylene Materials”, 19th Symposium on Experimental Solid Mechanics, Germany, pp. 16-26, 25-28th May, 2011.
  16. Muhsin J. Jweeg, Mahmud R. Ismail, and Zainab M. Hwady” Theoretical and Experimental Investigation of the Dynamical Behavior of Complexx Configuratiopn Rotors” Baghdad university, Journal of Eng. , Vol. 20, pp.106-,Feb. 2015.
  17. Muhsin J. Jweeg, and Muhannad L. AL-Waily”Analytical Investigation of Time Dependent Tesional loading of Stiffened and Unstiffened Composite Lamintaed Plates” Onternational Journal of Mechanical and Production, Vol. 3, Issue 4, pp. 83-96, Oct. 2013.
  18. Muhsin J. Jweeg, and Thaeer  J. Ntayeesh “Dynamic Analysis of Pipes Conveying Fluid Using Analytical and Experimental Verification with the aid of S mart Materials, International journal of science and Research(IJSR),Vol. 4, Issue 12, pp. 1594-1605,Dec. 2015.
  19.  Muhsin J. Jweeg, and Thaeer  J. Ntayeesh “Active Vibration Control of a Cantilever Pipe Conveying Fluid Using Smart Mterial” Innovative Systems Design and Engineering< Vol. 6, No. 12, pp.53-79, 2015.
  20. M.J.Jweeg, E.Q. Hussein : Effects of Cracks on the Frequency Response o a Simply Supported Pipe Conveying Fluid , International Journal of Mechanical nad Mechatronics Eng., IJMME-IJENS, Vol. 17, No: 05, 2017.
  21.  Kadhim K. Resan, Abbas A. Alassadi, Mihannad AL-Waily, Muhsin J. Jweeg,: iInfluence o Temperature on Fatigue Life for the Friction Stir Welding of a Aluminuum Alloy Materials, International Journal of Mechanical nad Mechatronics Eng., IJMME-IJENS, Vol. 18, No: 02, 2018.
  22. Muhsin J. Jweeg, Emad Q. Hussein, and Karrar Ibrahim Mohammed : A suggested Analytical Solution or Dynamic Behavior of a Cracked Pipe Conveying Fluid, International Journal o energy and Environment, Vol: 09, Issue 01, 2018.
  23. Ameer  A. Kadhm, Muhanned AL-Waily, Zaman Abdul Almalik Abud Ali, Muhsin J. Jweeg, and Kadhim K. Resan : Improvement  Fatigue Life and Strength of Isotropic Hyper Composite Materials by Reinforcement with Different Powder Materials, Vol: 18, No: 02, 2018.
  24. Ehab N Abbas, Muhsin J. Jweeg, Muhannad Al- Waily: Fatique Characterization of Laminated Composite Used in Prosthetic Sockets Manufacturing, Journal of Mechanical Engineering Research and Development, Vol. 43, No. 5 pp. 384-399, 2020.
  25. Muhannad Al-Waily, Mohsin A. Al-Shammari, Muhsin J. Jweeg: An Analytical Investigation of Thermal Buckling Behavior of Composite Plates Reinorced by Carbon Nano Particles, Engineering Journal, Vol. 24,Issue 3, 2020.
  26. S.E. Sadiq, S.H. Bakhy. And M.J.Jweeg: Crashworthiness Behavior conf. series, Materials Science and Engineering 881(2020)